Cookie Img Back to top
Send SMS    Call Me Free Offline
Home » Products » Air Gas Mixer With Throttle Valve » Air Gas Mixer With Throttle Valve

Air Gas Mixer With Throttle Valve

Air Gas Mixer With Throttle Valve
Air Gas Mixer With Throttle Valve
Product Code : 1003
Product Description

AIR “ BIOGAS MIXER WITH THROTTLE VALVES (CARBURETOR)

 

A specially designed automatic  (adjustable as per gas properties) Air / Gas Controller and mixing systems provided to take care of efficient, smooth working of engine from no-load to full load. These engines operate smoothly at vast combinations of  bio-gases at negative suction up to 80mm water column hence root blower is not required and gases can be feed as it is from the gas plant.

Switching over to the design of mixture to negative suction of gas has resolved the complicated Air mixing system to a very simple system. This also minimizes the waste of biogas due to less gas supply at lesser load conditions as well as wastage of gases due to incomplete combustion. Engines speed stability at all load is far more better than dual fuel engines. This also illuminates the requirement of power to run, the root blower before starting the engine, hence suitable for areas without electricity also.

This  carburetor has the facility to adjust the Air / Biogas ratio as per the requirements of the gas. In case, if the Methane (CH4) percentage is less, it can be set manually in even running conditions and once set can be used in full bandwidth of engine capacity. Send inquiry to :

ELECTRONIC IGNITION SYSTEM  AND  COMPRESSION RATIO ADJUSTMENT SUITABLE FOR

1 AND 2 CYLINDER ENGINES

NO.

DESCRIPTION OF ITEMS

1.

M.S. Cam Shaft Bush with Pin & Keyway

2.

Adjustable Ring for Proximity Sensors

3.

C.I. Cam Gear Cover

4.

Proximity Sensor & SSR

5.

High Voltage Electronic  Ignition Coil & Wiring bracket

6.

Engine Cylinder Head with Plug, Valve, Spring, Valve Cap, etc. and Long Push Rods, complete

7.

Head Gasket

8.

Cyl. Block Spacing Sims or Gaskets

9.

Spark Plug Cable

10.

Wiring Harness

11.

Coil Resting Bracket

12.

SSR Resting Bracket

OTHER ITEMS REQUIRED FOR CONVERSION SYSTEM  FROM DIESEL ENGINE TO BIOGAS RUN

A.

MECHANICAL GOVERNING SYSTEM COMPLETE

B.

AIR – BIOGAS BUTTERFLY WITH AIR-GAS MIXER (CARBURETOR) SUITABLE FOR CONNECTION WITH MECHANICAL GOVERNING SYSTEM COMPLETE.

C.

AIR CLEANER HEAVY DUTY WITH FLANGE TYPE INLET SUITABLE FOR FITTING ON CARBURETOR

D.

BALL VALVE FOR CONTROLLING BIOGAS FEEDING TO CARBURETOR

E.

BATTERY AND BATTERY CABLE

F.

RADIATOR, FAN, FAN COWL, PULLEY, BELT, ETC. AND WATER CIRCULATING FAN, BRACKET, PULLEY, BELT, ETC.

G.

INSTALLATION CHARGES

NOTE :  Conversion of diesel engine to biogas will reduce power  upto 45 %, that means  Biogas Power Genset requires double  H.P. of engine per KVA of Biogas Power.Suppose : 5 KVA  3 Phase  Biogas

Power Genset, requires 10 H.P.  Diesel Engine. The price difference of diesel engine should be considered. Send your inquiry to :


HI-TECH ENERGY SAVING EQUIPMENTS